Namizni verifikator REA ScanCheck 3

• Contactless inspection with a specifically optimised laser which resembles a scanner register
• Simple positioning with the visible laser beam
• Keypad with 22 input keys for configuring and entering comments on-site
• Suitable for measuring large and small barcodes
• Memory for up to 1000 readings
• USB connection for a portable printer
• Reliable PC communication per network possible
• DHCP capable

Features:

• verifier in conformity with ISO/IEC 15426-1
• contact-free linear scanning with laser technology
• code verification / evaluation according to the verification specifications ISO/IEC 15416 or ANSI X3.182
• alternatively with optional parameters according to the respective symbology standards (configurable)
• specification of desired class or complete verification profile with target/actual comparison
• multiple measurement with averaging from 2 to 10 single measurements possible
• auto discrimination of the most important barcode symbologies
• automatic code size and check digits monitoring
• verification and visualization of quiet zones with an extended area
• ratio monitoring for two bar width codes (e.g. Code 39, 2/5i)
• verification of GS1 General Specification requirements
• verification / evaluation of GS1-128 data structures
• multilingual reports and user interface

Technical Data:

• bar code verification unit with measurement accuracy in conformity with ISO/IEC 15426-1
• ARM9, 32bit Microprocessor, 180Mhz, 32 MB RAM, 32MB Flash ROM, 512MB-MMC-Flash memory
• ElinOS Embedded Linux operating system
• red light illumination with 670nm semiconductor laser, laser protection class II, <1mW, from 45°
• max. measurement width 140 mm, or 175 mm with 20 mil adapter, each incl. bright fi eld zones
• aperture: 6, 8 mil 10 mil, with adapter 20mil (equals 0.15; 0.2; 0.25, 0.5 mm)
• measuring accuracy: +/-5% for average value; +/-10% for extreme values; +/-8% for contrast values
• connections: RJ45 Ethernet port for power supply and TCP/IP data transfer, USB 2.0 port for printer connection and for software update
• color LCD display, 22 short-stroke keys for operation and evaluation on site
• power supply: internal via 4 NiMH battery cells and/or externally via Power-Over-Ethernet power supply, primary 110-240V~ with power connection cable for EU, US, UK, 2 CAT5 network patch cables (supplied)
• dimensions (L x W x H ): 222 x 85 x 92 mm
• weight: 1,115 g
• user maintenance: Instrument is factory calibrated. Recalibration, required monthly or in the case of location or lighting change, with supplied calibration card
• verification tool monitoring recommended monthly with supplied test code
• operation after activation with REA TransWin 32 evaluation software program for PC with MS® Windows 2000, XP, VISTA, 7 operating systems and .NET Framework version 2.0 or later possible with the following functionalities: Data upload, display, save, parameterization, remote control, print-out

Verification/evaluation of the following code types is possible:

EAN-13, UPC-A, UPC-E with/without ADD-ON, EAN-8, 2/5 Interleaved with/without check digit, ITF-14, Freight, Code 39 with/without check digit, PZN-Code, Code 32, Code 128, GS1-128 with/without content verification and GS1-Databar

Optional code type expansion:

2/5 3 Bars, 2/5 5 Bars, 2/5 IATA, 2/5 Baggage, 2/5 DHL Express (Freight code), Code39 Full ASCII, Code93, MSI, Plessey, Code 128 UPU, Code 39 UPU, Code 39 HIBC, Code 128 HIBC, Codabar Monarch (18), LAETUS Pharmacode, LAETUS, Mini Pharma Code