Investicijo v ročni terminal TC20 lahko nadgradite z RFID čitalniškim nastavkom. Tako ročni terminal nadgradite z RFID tehnologijo, ki omogoča branje vsebine oznake brez vidnega polja. Na ta način lahko spremenite delovne procese, kjer je uporaba te tehnologije smiselna. Tukaj si lahko pogledate primer uporabe RFID tehnologije pri inventuri osnovnih sredstev. RFD2000 je zmožen odčitati 700 oznak na sekundo, deluje v oddaljenosti do 6 metrov, je izjemno robusten (padci na beton z višine 1,2 m ne predstavljajo problema).
Tehnične specifikacije
Dimensions
5.9 in. H x 3.1 in. W x 5.2 in. L
14.9 cm H x 7.9 cm W x 13.3 cm L
Weight
~10.9 oz. / ~310 grams (sled with battery)
Power
PowerPrecision+ Li-Ion 3160 mAh battery
Notification
LEDs
User Input
Trigger
Standards Supported
EPC Class 1 Gen 2
EPC Gen2 V2
RFID Engine
Zebra Proprietary Radio Technology
Read Rate
Up to 700 tags/sec
Nominal Read Range
~19.7+ ft. / ~6+ m
Frequency Range / RF Output
US: 902–928 MHz; 0 — 30 dBm (EIRP)
EU: 865–868 MHz; 0 — 30 dBm (EIRP)
Japan: 916–921 MHz (with LBT), 0 — 30 dBm (EIRP)
Drop Specification
Multiple 4 ft. / 1.2 m drops to concrete at room temperature
Tumble Specification
500 cycles (1000 drops, 1.6 ft. / 0.5 m) at room temperature
Operating Temperature
-10°C to 50°C / 14°F to 122°F
Storage Temperature
-40°C to 70°C / -40°F to 158°F
Humidity
5–85% non-condensing
Electrostatic Discharge
+/-15kV air discharge
+/-8kV direct discharge
+/-8kVdc indirect discharge
Sealing
IP52
Cradles
1-Slot Charging Cradle
5-Slot Charging Cradle
Host Connection
Electrical 8-pin connection
Host Computer
Zebra TC20 mobile computer
EMI/EMC
FCC Part 15 Subpart B Class B
ICES 003 Class B
EN 301 489-1
EN 301 489-3
EN55024
EN 55032 Class B
Electrical Safety
UL 60950-1
CAN/CSA C22.2 No. 60950-1
IEC 60950-1
EN 60950-1
RF Exposure
EU: EN 50364, EN 62369-1, EN 50566, EN 62311
USA: FCC Part 2.1093 OET Bulletin 65 Supplement ‘C’
Canada: RSS-102
Subject to the terms of Zebra’s hardware warranty statement, the RFD2000 and the RFD2000 battery are warranted against defects in workmanship and materials for a period of twelve (12) months.
