Termalni tiskalniki Zebra ZT200 združujejo lastnosti industrijskih in namiznih tiskalnikov ter so zato primerni za vse, ki opažajo, da jim namizni modeli ne ponujajo dovolj. Priporočamo jih v panogah, kot so proizvodnja, logistika in zdravstvo, in sicer za tiskanje etiket do širine 104 mm, pri hitrost 152 mm/s in ločljivost tiskalne glave 8 ali 12 pik/mm (203 oz. 300 dpi). Ukazni jeziki: ZPL I, ZPL II in podpora za XML in UNICODE nabor znakov. Vgrajeni pomnilnik RAM in FLASH s kapaciteto 128 MB. Komunikacija: serijski RS-232 in USB 2.0., opcijsko tudi ethernet in WiFi. Vgrajena sta prosojni in odbojni senzor. Premer nosilca nalepk za jedro nalepk fi 25 - 76 mm. V ponudbi je tudi različica z nožem in odlepljevalnikom.
Pomembni konkurenčni prednosti:
izboljšana mehanika navijanja folije
skladnost z EU standardi "EnergyStar" (zeleno javno naročanje)
V osnovi je na voljo v dveh različicah, ZT220 in ZT230, ki se med seboj razlikujeta po:
ohišju (ZT220 ima ohišje iz odpornih polimerov, medtem ko je ohišje ZT230 v celoti kovinsko (priporočamo za industrijska okolja)
kapaciteti tiskalnega traku dolžine 300 m (ZT220) in daljši - 450 m (ZT230)
vgrajenem navijalniku nosilnega traku nalepk (ZT230)
LCD prikazovalniku z enostavnim uporabniškim menijskim vmesnikom in dodatnih tipkah (ZT230)
Tehnične specifikacije
Standard Features
Print Methods: Direct thermal and Thermal Transfer (optional)
Resolution: 203 dpi
More Standard Features
Element Energy Equalizer™ (E3®) for superior print quality
USB 2.0 and RS-232 serial ports
Dual media sensors - transmissive and reflective sensing technology, selectable through software or front panel
Media supply hanger designed for 1" (25mm) through 3" (76mm) core diameters
Side loading metal print mechanism with head open lock
Resolution: 203 dpi (8 dots/mm) 300 dpi (12 dots/mm) Memory: 128MB Flash, 128MB RAM Print width: 4.09"/104 mm Print length: 203 dpi: 157"/3,988 mm and 300dpi: 73"/1854 mm (optional) Print speed: 203 dpi: 6" (152 mm)/sec 300 dpi: 6" (152 mm)/sec Media sensors: Reflective, Transmissive
Media Characteristics
Maximum label and liner width: 4.50"/114 mm Minimum label and liner width: 0.75" (19.4 mm) Maximum non-continuous label length: 39"/991 mm Maximum Media Roll Size:
8.0" (203 mm) O.D. on a 3" (76 mm) I.D. core
6.0" (152 mm) O.D. on a 1" (25 mm) I.D. core
Media thickness: 0.003"/0.076 mm to 0.010"/0.25 mm Media types: continuous, die-cut, notch, black mark
Ribbon Characteristics
Outside diameter: 300m = 2.7"/68.6 mm Standard length: 984'/300 m Ribbon width: 1.57"/40 mm to 4.33"/110 mm Ribbon setup: Ribbon wound ink-side out ID Core: 1.0" (25.4 mm)
Operating Characteristics
Operating temperature TT: Operating temperature: 40° F (5° C) to 104° F (40° C) Thermal transfer DT: Operating temperature: 32° F (0° C) to 104° F (40° C) Direct thermal Storage temperatures: -40° F (-40° C) to 140° F (60° C) Operating humidity: 20% to 85% non-condensing Storage humidity: 5% to 85% non-condensing Energy Star certified universal auto-ranging (PFC-compliant) power supply 100-240VAC; 47-63 HZ. Not 90–265VAC; 48–62Hz
Agency approvals
IEC 60950
EN 55022 Class B
EN55024
EN 61000-3-2
EN 61000-3-3
Physical Characteristics
Width: 9.5"/242 mm Height: 10.9" (277 mm) Depth: 17" (432 mm) Weight: 20 lbs (9.1 kg) Shipping weight: 25 lbs (11.4 kg)
Related Products
Options
Factory Installed Printer Options
Thermal Transfer Core-to-Core Ribbon Handling System
Print head 300 dpi (12 dots/mm)
A front mount, passive peel option, w/ no take-up spindle
A front mount guillotine cutter
Liner Take-Up for ZT230 only, rewinds entire 8" roll of liner (includes peel option)
Field Installed Printer Options
Additional scalable and smooth bitmapped fonts available
Print head 300 dpi (12 dots/mm)
A front mount, passive peeler
A front mount guillotine cutter
Internal parallel port option
ZebraNet 10/100 Print Server – supports 10/100 Ethernet networks internally integrated option that enables the use of ZebraLink Webview and Alert features.
ZebraNet n Printer Server – supports 802.11 a/b/g/n networks via an internally integrated option.
Real Time Clock (RTC) –date/time for standalone applications
Keyboard Display Unit (KDU) option – Enter variable data and retrieve stored forms for standalone applications (requires null modem adapter with DB9 serial cable).
Communication and Interface Capabilities
ZebraNet® 10/100 Print Server – supports 10/100 Ethernet networks internally integrated option that enables the use of ZebraLink Webview and Alert features.
ZebraNet® n Printer Server – supports 802.11 a/b/g/n networks via an internally integrated option.
Programming Languages
Core programming languages: XML, ZPL I/ZPL II
Bar Codes/Symbologies
Bar code modulus "X" dimension:
- Picket fence (non-rotated) orientation:
203 dpi = 4.9 mil to 49 mil
300 dpi = 3.3 mil to 33 mil
- Ladder (rotated) orientation:
203 dpi = 4.9 mil to 49 mil
300 dpi = 3.9 mil to 39 mil
Bar code ratios – 2:1, 7:3, 5:2, & 3:1
Linear bar codes: Code 11, Code 39, Code 93, Code 128 with subsets A/B/C and UCC Case Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2-or 5-digit extensions, Plessey, Postnet, Standard 2-of-5, Industrial 2-of-5, Interleaved 2-of-5, Logmars, MSI, Codabar and Planet Code
2-dimensional bar codes: Codablock, PDF417, Code 49, DataMatrix, MaxiCode, QR Code, TLC 39, MicroPDF, RSS-14 (and composite), Aztec
Fonts and Graphics
Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times, height and width independently. However, fonts E and H (OCR-A and OCR-B) are not considered ―in-spec" when expanded.
The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory.
IBM Code Page 850 international character sets are available in the fonts A, B, C, D, E, F, G, and 0 through software control.
Resolution: 203 dpi (8 dots/mm) 300 dpi (12 dots/mm) Memory: 128MB Flash, 128MB RAM Print width: 4.09"/104 mm Print length: 203 dpi: 157"/3,988 mm and 300dpi: 73"/1854 mm (optional) Print speed: 203 dpi: 6" (152 mm)/sec 300 dpi: 6" (152 mm)/sec Media sensors Reflective, Transmissive
Media Characteristics
Maximum label and liner width: 4.50"/114 mm Minimum label and liner width: 0.75" (19.4 mm) Maximum non-continuous label length: 39"/991 mm Maximum Media Roll Size:
8.0" (203 mm) O.D. on a 3" (76 mm) I.D. core
6.0" (152 mm) O.D. on a 1" (25 mm) I.D. core
Media thickness: 0.003"/0.076 mm to 0.010"/0.25 mm Media types: continuous, die-cut, notch, black mark
Ribbon Characteristics
Outside diameter: 300m = 2.7"/68.6 mm; 450m = 3.2"/81.3 mm Standard length: 984'/300 m or 1476'/450 m Ribbon width: 1.57"/40 mm to 4.33"/110 mm Ribbon setup: Ribbon wound ink-side out ID Core: 1.0" (25.4 mm)
Operating Characteristics
Operating temperature TT: Operating temperature: 40° F (5° C) to 104° F (40° C) Thermal transfer DT: Operating temperature 32° F (0° C) to 104° F (40° C) Direct thermal Storage temperatures: -40° F (-40° C) to 140° F (60° C) Operating humidity: 20% to 85% non-condensing Storage humidity: 5% to 85% non-condensing Energy Star certified universal auto-ranging (PFC-compliant) power supply 100-240VAC; 47-63 HZ. Not 90–265VAC; 48–62Hz
Agency approvals
IEC 60950
EN 55022 Class B
EN55024
EN 61000-3-2
EN 61000-3-3
Physical Characteristics
Width: 9.5"/242 mm Height: 10.9" (277 mm) Depth: 17" (432 mm) Weight: 20 lbs (9.1 kg) Shipping weight: 25 lbs (11.4 kg)
Related Products
Options
Factory Installed Printer Options
Thermal Transfer Core-to-Core Ribbon Handling System
Print head 300 dpi (12 dots/mm)
A front mount, passive peel option, w/ no take-up spindle
A front mount guillotine cutter
Liner Take-Up for ZT230 only, rewinds entire 8" roll of liner (includes peel option)
Field Installed Printer Options
Additional scalable and smooth bitmapped fonts available
Print head 300 dpi (12 dots/mm)
A front mount, passive peeler
A front mount guillotine cutter
Internal parallel port option
ZebraNet 10/100 Print Server – supports 10/100 Ethernet networks internally integrated option that enables the use of ZebraLink Webview and Alert features.
ZebraNet n Printer Server – supports 802.11 a/b/g/n networks via an internally integrated option
Real Time Clock (RTC) –date/time for standalone applications
Keyboard Display Unit (KDU) option – Enter variable data and retrieve stored forms for standalone applications (requires null modem adapter with DB9 serial cable).
Communication and Interface Capabilities
Internal parallel port option
ZebraNet® 10/100 Print Server – supports 10/100 Ethernet networks internally integrated option that enables the use of ZebraLink Webview and Alert features.
ZebraNet® n Printer Server – supports 802.11 a/b/g/n networks via an internally integrated option.
Programming Languages
Core programming languages: ZPL I/ZPL II
Bar Codes/Symbologies
Bar code modulus "X" dimension:
- Picket fence (non-rotated) orientation:
203 dpi = 4.9 mil to 49 mil
300 dpi = 3.3 mil to 33 mil
- Ladder (rotated) orientation:
203 dpi = 4.9 mil to 49 mil
300 dpi = 3.9 mil to 39 mil
Bar code ratios – 2:1, 7:3, 5:2, & 3:1
Linear bar codes: Code 11, Code 39, Code 93, Code 128 with subsets A/B/C and UCC Case Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2-or 5-digit extensions, Plessey, Postnet, Standard 2-of-5, Industrial 2-of-5, Interleaved 2-of-5, Logmars, MSI, Codabar and Planet Code
2-dimensional bar codes: Codablock, PDF417, Code 49, DataMatrix, MaxiCode, QR Code, TLC 39, MicroPDF, RSS-14 (and composite), Aztec
Fonts and Graphics
Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times, height and width independently. However, fonts E and H (OCR-A and OCR-B) are not considered ―in-spec" when expanded.
The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory.
IBM Code Page 850 international character sets are available in the fonts A, B, C, D, E, F, G, and 0 through software control.
